Common system maintenance of electronic crane scale

1:After the weighing instrument is installed, the manual, certificate, installation drawing and other materials should be properly kept, and it can be put into use only after it has been verified by the local measurement department or the nationally recognized measurement department.

2:Before the system is powered on, the grounding device of the power supply must be checked for reliability; after get off work stops, the power supply must be cut off.

3:Before using the weighing instrument, check whether the scale body is flexible and whether the performance of the supporting parts is good.

4:The weighing display controller must be turned on and warmed up first, usually about 30 minutes.

5:In order to ensure the accurate measurement of the system, there should be anti-lightning facilities. It is strictly forbidden to use the weighing platform for neutral grounding when welding near the weighing instrument to prevent damage to electrical components.

6:For the ground scale installed in the field, the drainage device in the foundation pit should be checked regularly to avoid blockage.

7:Keep the junction box dry. Once there is moist air and water droplets in the junction box, use a hair dryer to dry it.

8: In order to ensure the normal measurement of the weighing instrument, it should be calibrated regularly.

9:When hoisting and measuring heavy objects, there should be no impact; when measuring vehicle-mounted heavy objects, the rated capacity of the system should not be exceeded.

10:The axle load of the truck scale is related to the sensor capacity, the distance of the sensor fulcrum and other factors. In general, truck scales prohibit the over-balance of short-wheelbase vehicles such as forklifts that are close to drunk and weighed heavily.

11:Crane scale operators and instrument maintenance personnel need to read the manual and relevant technical documents before they can work.

I am BangGuo from Ningbo SAINTBOND,

Please visit our website: www.cranescaleloadcell.com

Ninbo SAINTBOND Electronic Technology Co.,Ltd

saintbond@saintbond.com

Mobile/WhatsApp/WeChat/LinkedIn:+86-18868650852