Electronic crane scales are strictly forbidden to lift objects with the spreader set

Electronic crane scale is a kind of weighing equipment commonly used in the industrial industry at present, which brings great convenience to everyone's work. However, many users often have some new small problems due to operating reasons. Bringing some troubles, in order to solve this problem and save time, introduces some common fault solutions for electronic crane scales.

1.The electronic crane scale meter cannot be charged. If there is no response when the charger is connected (that is, there is no voltage display on the display window on the charger), it may be that the meter is over-discharged (the voltage is below 1V) and the charger cannot detect it. Charger discharge button, then plug in the meter.

2.After the meter is turned on, there is no weighing signal. Please check whether the battery voltage of the scale is normal, plug in the transmitter antenna and turn on the transmitter power. If there is still no signal, please check whether the meter channel corresponds to the transmitter.

3.The characters printed on the electronic crane scale are not clear or can not be printed. Please check whether the ribbon is off or the ribbon is not printed. Replace the ribbon.

4.The printer is difficult to feed paper and accumulates too much dust. The printer head should be cleaned and a small amount of lubricant can be added.

5.There is an electronic scale interference of the same frequency near the digital random jump, and the frequency of the scale and the meter can be changed.

6.If the battery wire is hot or the battery is hot after turning on part of the power supply of the scale body, please unplug the battery head and reinsert it.

With the development of the scientific society, the electronic crane scale industry is also constantly innovating. With the beginning of the mechanical age, it has transformed into the electronic age. From simple electronic weighing, it can now achieve multiple functions. , The electronic platform scale has been realized very early.

But the electronic crane scale has not been broken because of the particularity of his use.

Precautions for using electronic crane scale:

1:The weight of the weighed item shall not exceed the large range of the electronic crane scale.

2:There must be no jamming between the shackle (lifting ring) of the electronic crane scale, the hook and the axle pin of the suspended object, that is, the contact surface in the vertical direction should be at the center point, and it must not touch on two sides And stuck, there should be full freedom.

3:When running in the air, the lower end of the hanging object shall not be lower than the height of a person.

The operator should keep a distance of more than 1 meter from the hanging object.

4:The electronic crane scale is strictly prohibited to use the spreader set to lift the object diagonally.

5:When not working, electronic crane scales, rigging and lifting fixtures are not allowed to hang heavy objects and should be unloaded.

In order to avoid sexual deformation of parts.

I am BangGuo from Ningbo SAINTBOND,

Please visit our website: www.cranescaleloadcell.com

Ninbo SAINTBOND Electronic Technology Co.,Ltd

saintbond@saintbond.com

Mobile/WhatsApp/WeChat/LinkedIn:+86-18868650852