what is Brake Pedal Force Load Cell

Brake Pedal Force Load Cell

Introduction:

This pedal force meter Load Cell Pedals is used to measure the braking force of sports vehicles. When you need to effectively test the braking of trucks, cars and motorcycles, you need to use it to measure the pedal force. The measured data can be indicated through a terminal or also Option to convert through an rf-conversion line;

Application:

Pedal force measurement;

Signal output: 1mv/N;

Definition:

◎Green:12V power supply is positive;

◎Brown:negative power supply, shielded wire;

◎Yellow:positive signal;

◎White:Signal negative hand force dynamometer:

Application Overview:

The manufacturing of brake systems generally requires several stages, from the initial development stage, durability test, test tracking test to mass production to brake test.

Instructions for use:

In this test plan, the engineer installed a special pedal force sensor Load Cell Pedals above the pedal to accurately measure the force applied to the brake pedal and test and verify the integrity of the brake system.

◎The engineer selects the pedal force sensor Load Cell Pedals of the range according to the needs, and generally will be equipped with a mounting plate to facilitate installation;

◎In this test application, the engineer installed the pedal force sensor above the car's brake pedal to accurately measure the force applied to the brake pedal. The test verifies the integrity of the brake system (the measuring range of the sensor is 225N to 2250N, and the accuracy can reach 0.05%);

◎The top of the sensor Load Cell Pedals has a certain curvature. This design helps to apply the pedaling force to the center of the sensor;

◎Engineers can use handheld display instruments and display instruments to monitor the values, or use the USB collection scheme to directly transmit the sensor data to the computer. The collection software can monitor the sensor values in real time, and the software can read the values of 16-channel sensors at the same time. It can also draw curves and store data.

Use of the product:

Pedal force sensor Load Cell Pedals (such as LC603), and its supporting instruments (USB acquisition module, digital display, handheld instrument and strain amplifier).

Uses and features:

Pedal force special sensor Load Cell Pedals, low profile, easy to install, using foil strain gauge technology, high accuracy, stable and reliable performance, this system can also be used for accelerator, clutch, parking brake pedal test.

Dimension:

Product Description:

The pedal force sensor has the characteristics of compact structure, low height, high accuracy, good stability and easy installation, and is suitable for measuring the braking force of moving vehicles in the automobile testing industry.

Technical Parameter: