Tel.: +86-574-86902685
Mobile/WeChat/WhatsApp: +86-13186894933
- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
| Quantity: | |
|---|---|
| PDF Export | |
Zhejiang, China
SAINTBOND
LC2306
PRESSURE SENSOR
load cell
Good quality and low price
Welcome
OEM&ODM
5~40Days
30% advance payment, the rest payment before delivery
Carton
Cap. | A | B | C | D | E | M |
0-5N-30N | 16 | 19.1 | 5 | 6.7 | 17 | M3 Depth 3 mm |
0-50N | 16 | 19.1 | 6 | 7.5 | 17 | M4 Depth 3 mm |
Note:
1:Screws should not be screwed too deep and shall not exceed 4 millimeters. You should not touch the middle part of the sensor so as not to affect the measurement result.
When the
2:Sensor is installed, the two sides of the cover plate can not be contacted with the middle cylinder, so as to avoid measuring the result
Capacity | A | B | C | M |
0-100N-500N | 16 | 19.1 | 6 | M4 Depth 3 mm |
0-200N-2KN | 26 | 40 | 12 | M8 Depth 8 mm |
Note: screws must not be screwed too deep when they are installed. You should not touch the middle part of the sensor so as not to affect the measurement result.
Description:
Ultra small installation size, width of only 5 mm, height of 19.1 mm; high speed dynamic response output, high accuracy; measuring force: internal thread tension or compression direction. Widely used in automatic force detection, typical applications: key detection.
Technical Data:
Capacity | 0-5N~2000N | Material | Stainless Steel |
Rated output | 2.0 ±10% mV/V | Output Impedance | 350±3Ω |
Non-linearity | 0.05 % F.S. | Insulation | >5000MΩ/10VDC |
Hysteresis | 0.05 % F.S. | Recommended Excitation | 2.5-5V |
Repeatability | 0.05 % F.S. | Excitation max | 10V |
Creep(30min) | 0.05 % F.S. | Compensated Temp Range | -10~60°C |
Temp Effect On Output | 0.1 % F.S./ 10°C | Operating Temp Range | -20~80°C |
Temp Effect On Zero | 0.1 % F.S./ 10°C | Safe Load | 1.2 |
Protection Class | IP 65 | Ultimate Load Limit | 1.5 |
Input Impedance | 350±15Ω | Cable Length | ∅2-3 x 3m |
LC2306 Miniature S Type Load Cell 500g 1kg 5kg 10kg 20kg 30kg 50kg
| Product Name | LC2306 Miniature S Type Load Cell 500g 1kg 5kg 10kg 20kg 30kg 50kg |
| Features | Good quality and low price |
| Service | OEM&ODM |
| Custom Design | Welcome |
| Sample Lead Time | 5~40Days |
| Payment Terms | 30% advance payment, the rest payment before delivery |
| Market | all over the world |
| Form of sale | Factory supply |
Q1:How do you control the quality?
A:We have QC team comply with TQM,each step is in compliance to the standards.At the same time,they will take photos and shoot video for you.
Q2:Why should I choose your company?
A:1,We have own logistics who cooperate different forwarders at the ports of destination.It's good for you to do DDP or DDU.
A2:We have own warehouse at the ningbo port China.
If you want to mix disparate products to different stores,we can help you to finish the work when our workers receive the goods from suppliers. New carton labels will be printed and new pallets with unique IDs will be created.It will save labor cost for you.
Q3: Can you print our brand on the product?
A: Yes, Of course. It can make customer’s brand logo.
Q4: What is your terms of packing?
A: Generally, we pack our goods in neutral cartons. If you have legally registered patent, we can pack the goods by your logo after getting your authorization letters.
Q5: What about the Wheel axle scales price?
A: We promise the Wheel axle scales price we offer is lowest if same application, only to enlarge the market share.
Q6:What’s your company payment terms?
A:L/C at sight/ 30days, T/T 30%deposit 70% before shipment.
Q7:Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery. We have QC team comply with TQM,each step is in compliance to the standards.
Cap. | A | B | C | D | E | M |
0-5N-30N | 16 | 19.1 | 5 | 6.7 | 17 | M3 Depth 3 mm |
0-50N | 16 | 19.1 | 6 | 7.5 | 17 | M4 Depth 3 mm |
Note:
1:Screws should not be screwed too deep and shall not exceed 4 millimeters. You should not touch the middle part of the sensor so as not to affect the measurement result.
When the
2:Sensor is installed, the two sides of the cover plate can not be contacted with the middle cylinder, so as to avoid measuring the result
Capacity | A | B | C | M |
0-100N-500N | 16 | 19.1 | 6 | M4 Depth 3 mm |
0-200N-2KN | 26 | 40 | 12 | M8 Depth 8 mm |
Note: screws must not be screwed too deep when they are installed. You should not touch the middle part of the sensor so as not to affect the measurement result.
Description:
Ultra small installation size, width of only 5 mm, height of 19.1 mm; high speed dynamic response output, high accuracy; measuring force: internal thread tension or compression direction. Widely used in automatic force detection, typical applications: key detection.
Technical Data:
Capacity | 0-5N~2000N | Material | Stainless Steel |
Rated output | 2.0 ±10% mV/V | Output Impedance | 350±3Ω |
Non-linearity | 0.05 % F.S. | Insulation | >5000MΩ/10VDC |
Hysteresis | 0.05 % F.S. | Recommended Excitation | 2.5-5V |
Repeatability | 0.05 % F.S. | Excitation max | 10V |
Creep(30min) | 0.05 % F.S. | Compensated Temp Range | -10~60°C |
Temp Effect On Output | 0.1 % F.S./ 10°C | Operating Temp Range | -20~80°C |
Temp Effect On Zero | 0.1 % F.S./ 10°C | Safe Load | 1.2 |
Protection Class | IP 65 | Ultimate Load Limit | 1.5 |
Input Impedance | 350±15Ω | Cable Length | ∅2-3 x 3m |
LC2306 Miniature S Type Load Cell 500g 1kg 5kg 10kg 20kg 30kg 50kg
| Product Name | LC2306 Miniature S Type Load Cell 500g 1kg 5kg 10kg 20kg 30kg 50kg |
| Features | Good quality and low price |
| Service | OEM&ODM |
| Custom Design | Welcome |
| Sample Lead Time | 5~40Days |
| Payment Terms | 30% advance payment, the rest payment before delivery |
| Market | all over the world |
| Form of sale | Factory supply |
Q1:How do you control the quality?
A:We have QC team comply with TQM,each step is in compliance to the standards.At the same time,they will take photos and shoot video for you.
Q2:Why should I choose your company?
A:1,We have own logistics who cooperate different forwarders at the ports of destination.It's good for you to do DDP or DDU.
A2:We have own warehouse at the ningbo port China.
If you want to mix disparate products to different stores,we can help you to finish the work when our workers receive the goods from suppliers. New carton labels will be printed and new pallets with unique IDs will be created.It will save labor cost for you.
Q3: Can you print our brand on the product?
A: Yes, Of course. It can make customer’s brand logo.
Q4: What is your terms of packing?
A: Generally, we pack our goods in neutral cartons. If you have legally registered patent, we can pack the goods by your logo after getting your authorization letters.
Q5: What about the Wheel axle scales price?
A: We promise the Wheel axle scales price we offer is lowest if same application, only to enlarge the market share.
Q6:What’s your company payment terms?
A:L/C at sight/ 30days, T/T 30%deposit 70% before shipment.
Q7:Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery. We have QC team comply with TQM,each step is in compliance to the standards.
0 / 50 Comment