Tel.:   +86-574-86902685
Mobile/WeChat/WhatsApp: +86-13186894933
High Quality Products Can Be Purchased.

Tracking for loadcell

Views: 0     Author: Annis from Saintbond company     Publish Time: 2022-03-11      Origin: www.cranescaleloadcell.com

Tracking
Determine the time gap of the next measurement according to the place of use, occasion, environment and other conditions. For each sensor
The empty scale output (or standard weight output), no-load output for tracking measurement.
(1) Use the production gap to regularly measure the empty scale output and no-load output of each sensor of the scale.
The conditions can measure the standard weight output of each sensor under the same standard weight. Make a record and compare it with the original record.
(2) When the sensor's empty scale output (or standard weight output) and no-load output change greatly, the tracking time gap should be
Shorten, the tracking density should be increased; when the output is stable for a long time, the tracking gap can be appropriately extended.
(3) The same load is compared by itself at different points (sections) of the scale, and the tolerance is exceeded, and the empty scale of each sensor is measured
Output, no-load output, make a record, and compare with the original record.
This method is commonly used under fast-paced weighing conditions to understand the operating status of the scale.
(4) When the sensor's "sub-healthy" phenomenon appears, it is necessary to increase the output of the empty scale tracking each sensor (or
Standard weight output) The measured density of no-load output, make a record, and compare it with the original record.
(5) For digital sensors, use the same method to enter the empty scale internal code value, empty internal code value, and standard weight internal code value.
Conduct monitoring and tracking, and make good records.
3. Analysis and diagnosis
According to the comparison, it is necessary to carefully analyze the weighing conditions to eliminate falsehoods and seek truth. Targeted on the status of on-site mechanical components
(Pad bumps, etc.) Check to determine whether it is a mechanical problem or other problems. It is a mechanical problem that needs to be corrected and resolved in time. Pass on
Sensory "sub-health" is often accompanied by certain phenomena. The data obtained at this time should be grasped as the analysis section.
Points, discover, confirm and find out the inherent laws in the comparison. After multiple verifications, a diagnostic index is formed to guide today’s
After maintenance work. The type of each sensor and the weighing conditions are different, and the indicators of the "sub-health" status reflected are also different.
For example: after a period of monitoring and tracking analysis of a billet roller table scale, we have a preliminary understanding of the "sub-health" of its sensors
Condition indicator: When the change value of the sensor's empty scale output reaches about 50% to 70% of the mv value corresponding to the sensor's excitation voltage value, the performance of the sensor begins to deteriorate, and it can be diagnosed that the sensor is in a "sub-healthy" condition .
Four, concluding remarks
This method is suitable for resistance strain sensors and digital sensors. Through this method, it is convenient to grasp the time gap of
the sensor from "sub-health" to failure under the actual weighing conditions. All online sensors can be fully monitored to effectively understand the life cycle of sensors under specific working conditions, making spare parts work more solid and effective, and reflecting the awareness of conservation. In this way, when the scale fails to work abnormally, the fault point can be judged very quickly and accurately, and the repair time can be reduced. The popularization and application of this method reflects the maintenance concept of "zero failure"
15篇

Home

Contact Us

Web: www.saintbond.com      
E-mail: saintbond@saintbond.com  
Tel.: +86-574-86902686
Mobile/WeChat/WhatsApp: +86-13186894933
Follow us on social networks!
Copyrights 2003-2030 Ningbo SAINTBOND Electronic Co.,Ltd.   Sitemap