What should I do if the load cell amplifier weighing transmitter fails?

What should I do if the load cell amplifier weighing transmitter fails?
Weighing transmitter is a kind of mechanical engineering equipment that transforms physical quantity into an electrical signal. Although this equipment can greatly improve the efficiency of our daily life, since it is a machine, it will inevitably fail. , So our company has some small solutions for some common faults, hurry up and have a look! #Automation Equipment#

1: The remaining pressure cannot be released
If the pressure cannot be released when the weighing transmitter appears, and the sensor parts cannot be removed again, the simplest way to eliminate the sensor parts is to remove the sensor parts first, and then watch whether the zero position The normal value is restored. If the zero value is normal, it is likely that there is a problem with the sealing ring, and then the sealing ring can be replaced.

2: The value of the weighing transmitter is abnormal
Sometimes when using the transmitter, there may be such a situation, that is, when pressure is applied, the output of the transmitter does not change, but if the degree of pressure is increased, the output of the transmitter will be There is a sudden change, even if the pressure is stopped, the transmitter is difficult to return to the zero position. This situation is actually very simple, that is, there may be a problem with the sealing tape on the pressure sensor. Replace it.

3: often check the internal dust problem
To reduce the occurrence of failures, the best way is to frequently check the inside of the instrument, especially the pressure sensor. I