weighing module installation:-2

weighing module installation:

1: The weighing module integrates the load transfer device of the load cell and the installation connecting plate. Its unique design not only guarantees the high precision and long-term stability of the shear beam sensor, but also solves almost all factors. Errors caused by improper installation. It weighs accurately, is safe and reliable, and has diversified installation methods, suitable for various harsh environments.

2: The installation structure of the weighing module is divided into three structures: fixed, floating and semi-floating, allowing slight deformation of the container.

3: Static load weighing module installation method: stainless steel material is used to effectively resist the corrosion of corrosive substances. Three structures of fixed, floating and semi-floating can be used under various harsh conditions.

4: Dynamic load weighing module installation method: In the installation method of four dynamic load weighing modules, generally two of the weighing modules are limited on three sides, and the other two weighing modules are limited only at the ends.

Please pay attention to the following 2 points when installing:
Pay attention to horizontal adjustment, including the installation plane of a single module and the horizontal adjustment between a set of weighing modules;
Precautions for sensor debugging Before debugging, be sure to check whether the nut on the top of the support screw of each weighing module has been loosened and whether the sleeve is in a free state, otherwise, large errors will occur and even weighing cannot be performed.
19篇
Receiving and sending of loadometer sensors